View STGP7NB60KD_77106.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STGP7NB60KD STGB7NB60KD STGP7NB60KDFP
N-CHANNEL 7A - 600V - TO-220/TO-220FP/D2PAK PowerMESHTM IGBT
ADVANCED DATA TYPE STGP7NB60KD STGP7NB60KDFP STGB7NB60KD
s s s s s s s s
VCES 600 V 600 V 600 V
VCE(sat) < 2.8 V < 2.8 V < 2.8 V
IC 7A 7A 7A
HIGH INPUT IMPEDANCE (VOLTAGE DRIVEN) LOW ON-VOLTAGE DROP (Vcesat) LOW GATE CHARGE HIGH CURRENT CAPABILITY OFF LOSSES INCLUDE TAIL CURRENT VERY HIGH FREQUENCY OPERATION SHORT CIRCUIT RATED CO-PACKAGED WITH TURBOSWITCHTM ANTIPARALLEL DIODE
3 1 2
3 1 2
TO-220
3 1
TO-220FP
D2PAK INTERNAL SCHEMATIC DIAGRAM
DESCRIPTION Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH TM IGBTs, with outstanding performances. The suffix "K" identifies a family optimized for high frequency motor control applications with short circuit withstand capability. APPLICATIONS HIGH FREQUENCY MOTOR CONTROLS s SMPS AND PFC IN BOTH HARD SWITCH AND RESONANT TOPOLOGIES
s
ABSOLUTE MAXIMUM RATINGS
Symbol Parameter Value STGP7NB60KD STGB7NB60KD VCES VECR VGE IC IC ICM (n) PTOT VISO Tstg Tj June 2002 Collector-Emitter Voltage (VGS = 0) Emitter-Collector Voltage Gate-Emitter Voltage Collector Current (continuos) at TC = 25C Collector Current (continuos) at TC = 125C Collector Current (pulsed) Total Dissipation at TC = 25C Derating Factor Insulation Withstand Voltage A.C.(t = 1 sec; Tc = 25C) Storage Temperature Max. Operating Junction Temperature 80 0.64 --65 to 150 150 STGP7NB60KDFP 600 20 20 14 7 56 35 0.28 2500 V V V A A A W W/C V C C 1/9 Unit
(n) Pulse width limited by safe operating area
STGP7NB60KD/FP/STGB7NB60KD
THERMAL DATA
TO-220 D2PAK Rthj-case Rthj-amb Rthc-h Thermal Resistance Junction-case Max Thermal Resistance Junction-ambient Max Thermal Resistance Case-heatsink Typ 1.56 62.5 0.5 TO-220FP 3.57 C/W C/W C/W
ELECTRICAL CHARACTERISTICS (TCASE = 25 C UNLESS OTHERWISE SPECIFIED) OFF
Symbol VBR(CES) ICES IGES Parameter Collector-Emitter Breakdown Voltage Collector cut-off (VGE = 0) Gate-Emitter Leakage Current (VCE = 0) Test Conditions IC = 250 A, VGE = 0 VCE = Max Rating, TC = 25 C VCE = Max Rating, TC = 125 C VGE = 20V , VCE = 0 Min. 600 50 500 100 Typ. Max. Unit V A A nA
ON (1)
Symbol VGE(th) VCE(sat) Parameter Gate Threshold Voltage Collector-Emitter Saturation Voltage Test Conditions VCE = VGE, IC = 250A VGE = 15V, IC = 7 A VGE = 15V, IC = 7 A, Tc =100C Min. 5 2.3 1.9 Typ. Max. 7 2.8 Unit V V V
DYNAMIC
Symbol gfs Cies Coes Cres Qg Qge Qgc tscw Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Emitter Charge Gate-Collector Charge Short Circuit Withstand Time Vce = 0.5 VBR(CES), VGE = 15 V, Tj = 125C , RG = 10 10 VCE = 480V, IC = 7 A, VGE = 15V Test Conditions VCE = 25 V , IC =7 A VCE = 25V, f = 1 MHz, VGE = 0 Min. Typ. 5 560 68 15 42 7.9 17.6 Max. Unit S pF pF pF nC nC nC s
SWITCHING ON
Symbol td(on) tr (di/dt)on Eon Parameter Turn-on Delay Time Rise Time Turn-on Current Slope Turn-on Switching Losses Test Conditions VCC = 480 V, IC = 7 A RG = 10, VGE = 15 V VCC= 480 V, IC = 7 A RG=10 VGE = 15 V,Tj = 125C Min. Typ. 15 48 160 70 Max. Unit ns ns A/s J
2/9
STGP7NB60KD/FP/STGB7NB60KD
ELECTRICAL CHARACTERISTICS (CONTINUED) SWITCHING OFF
Symbol tc tr(Voff) td(off) tf Eoff(**) Ets tc tr(Voff) td(off) tf Eoff(**) Ets Parameter Cross-over Time Off Voltage Rise Time Delay Time Fall Time Turn-off Switching Loss Total Switching Loss Cross-over Time Off Voltage Rise Time Delay Time Fall Time Turn-off Switching Loss Total Switching Loss Vcc = 480 V, IC = 7 A, RGE = 10 , VGE = 15 V Tj = 125 C Test Conditions Vcc = 480 V, IC = 7 A, RGE = 10 , VGE = 15 V Min. Typ. 85 20 75 70 85 235 150 50 110 110 220 405 Max. Unit ns ns ns ns
J J
ns ns ns ns
J J
COLLECTOR-EMITTER DIODE
Symbol If Ifm Vf trr Qrr Irrm Parameter Forward Current Forward Current pulsed Forward On-Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current If = 6 A If = 6 A, Tj = 125 C If = 6 A ,VR = 200 V, Tj =125C, di/dt = 100A/s 1.8 1.4 100 135 2.7 Test Conditions Min. Typ. Max. 6 48 2.2 Unit A A V V ns nC A
Note: 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. 2. Pulse width limited by max. junction temperature. (**)Losses include Also the Tail (Jedec Standardization)
3/9
STGP7NB60KD/FP/STGB7NB60KD
Fig. 1: Gate Charge test Circuit Fig. 2: Test Circuit For Inductive Load Switching
4/9
STGP7NB60KD/FP/STGB7NB60KD
TO-220 MECHANICAL DATA
DIM. MIN. A C D D1 E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 DIA. 13.0 2.65 15.25 6.2 3.5 3.75 0.49 0.61 1.14 1.14 4.95 2.4 10.0 16.4 14.0 2.95 15.75 6.6 3.93 3.85 0.511 0.104 0.600 0.244 0.137 0.147 4.40 1.23 2.40 1.27 0.70 0.88 1.70 1.70 5.15 2.7 10.40 0.019 0.024 0.044 0.044 0.194 0.094 0.393 0.645 0.551 0.116 0.620 0.260 0.154 0.151 mm TYP. MAX. 4.60 1.32 2.72 MIN. 0.173 0.048 0.094 0.050 0.027 0.034 0.067 0.067 0.203 0.106 0.409 inch TYP. MAX. 0.181 0.051 0.107
A
C
D1
L2
D
F1
G1
E
Dia. L5 L7 L6 L4
P011C
L9
F2
F
G
H2
5/9
STGP7NB60KD/FP/STGB7NB60KD
TO-220FP MECHANICAL DATA
mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
A
B
L3 L6 L7
F1
D
F
G1 H
F2
L2 L5
E
123
L4
6/9
G
STGP7NB60KD/FP/STGB7NB60KD
D2PAK MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 8 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch
3
7/9
1
STGP7NB60KD/FP/STGB7NB60KD
D2PAK FOOTPRINT
TUBE SHIPMENT (no suffix)*
TAPE AND REEL SHIPMENT (suffix "T4")*
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W
8/9
BASE QTY 1000
mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1
inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574
0.35 0.0098 0.0137 0.933 0.956
* on sales type
STGP7NB60KD/FP/STGB7NB60KD
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. (c) http://www.st.com
9/9

▲Up To Search▲

Price & Availability of STGP7NB60KD

	To Download STGP7NB60KD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .